Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Synaptics" "CorePointer"
	InputDevice   "Mouse"      "SendCoreEvents"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
  Option        "AllowMouseOpenFail"
EndSection

Section "dri"
# Access to OpenGL ICD is allowed for all users:
#    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
    Group 27    # video
    Mode 0660
EndSection


Section "Files"
	RgbPath      "/usr/lib64/X11/rgb"
	ModulePath   "/usr/lib64/modules"
	FontPath     "/usr/share/fonts/misc/"
	FontPath     "/usr/share/fonts/TTF/"
	FontPath     "/usr/share/fonts/Type1/"
	FontPath     "/usr/share/fonts/CID/"
	FontPath     "/usr/share/fonts/75dpi/"
	FontPath     "/usr/share/fonts/100dpi/"
EndSection

Section "Module"
	Load  "glx"
	# This loads the miscellaneous extensions module, and disables
	# initialisation of the XFree86-DGA extension within that module.
    	SubSection  "extmod"
      	   Option    "omit xfree86-dga"   # don't initialise the DGA extension
    	EndSubSection
	Load  "dbe"
	Load  "dri"
	Load  "xtrap"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver  	"kbd"
	Option		"XkbRules"      "xorg"
	Option		"XkbModel"      "aspire5020"
	Option		"XkbLayout"     "us"
	#Option		"XkbVariant"    "nodeadkeys"
EndSection

Section "InputDevice"
  Identifier    "Synaptics"
  Driver        "synaptics"
  Option        "Device"        "/dev/psaux"
  Option        "Protocol"      "auto-dev"
  Option        "LeftEdge"      "1700"
  Option        "RightEdge"     "5300"
  Option        "TopEdge"       "1700"
  Option        "BottomEdge"    "4200"
  Option        "FingerLow"     "25"
  Option        "FingerHigh"    "30"
  Option        "MaxTapTime"    "180"
  Option        "MaxTapMove"    "220"
  Option        "VertScrollDelta" "100"
  Option        "MinSpeed"      "0.09"
  Option        "MaxSpeed"      "0.18"
  Option        "AccelFactor"   "0.0015"
  Option        "SHMConfig"     "on"
#  #  Option       "Repeater"      "/dev/ps2mouse"
EndSection

Section "InputDevice"
  Identifier    "Mouse"
  Driver        "mouse"
  Option        "Device"        "/dev/input/mice"
  Option        "Protocol"      "imps/2"
  Option        "ZAxisMapping"  "4 5"
  Option        "Buttons"        "5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "LPL"
	ModelName    "0"
EndSection

# === ATI device section ===

Section "Device"
    Identifier  "Card0"
    Driver      "fglrx"	
    VendorName  "ATI Technologies Inc"
    BoardName   "ATI Mobility X600"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000100"
    Option "MonitorLayout"              "AUTO, NONE"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
# === TV-out Management ===
    Option "NoTV"                       "yes"
    Option "TVStandard"                 "NTSC-M"
    Option "TVHSizeAdj"                 "0"
    Option "TVVSizeAdj"                 "0"
    Option "TVHPosAdj"                  "0"
    Option "TVVPosAdj"                  "0"
    Option "TVHStartAdj"                "0"
    Option "TVColorAdj"                 "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=3150
    Screen 0
EndSection

#Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DRIReinit"          	# [<bool>]
        #Option     "PanelOff"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "MonitorLayout"      	# [<str>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "MergedFB"           	# [<bool>]
        #Option     "CRT2HSync"          	# [<str>]
        #Option     "CRT2VRefresh"       	# [<str>]
        #Option     "CRT2Position"       	# [<str>]
        #Option     "MetaModes"          	# [<str>]
        #Option     "MergedDPI"          	# [<str>]
        #Option     "NoMergedXinerama"   	# [<bool>]
        #Option     "MergedXineramaCRT2IsScreen0" 	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "BIOSHotkeys"        	# [<bool>]
#	Identifier  "Card0"
#	Driver      "ati"
#	VendorName  "ATI Technologies Inc"
#	BoardName   "ATI Mobility X600"
#	BusID       "PCI:1:0:0"
#EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
   	DefaultDepth 24

	SubSection "Display"
		Viewport   0 0
		Depth     16
#		Modes     "1024x800"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
#		Modes     "1024x800"
	EndSubSection
EndSection